56
Working with the app via wifi:
The heater can also be operated using an app on your smartphone. The heater
must be connected with a wifi modem. See the back of the booklet for instructions
on how to install the app. By activating the app on your smartphone or tablet, and
selecting the device, you can operate the heater with the smartphone. You do not
need to set a day or time as they are set automatically (both on the app and on the
display).
You can use the app to switch the device on and off (without anticipation), regulate
the temperature and capacity, and set the frostprotection setting. The app can also
be used to set 20 on and off settings daily, on the weekly timer.
If the device is connected with wifi and is switched on, the display will show
(during screen saver) the wifi symbol and ON. If the device is connected to
wifi but switched off, the display will show the wifi symbol and OFF.
Note: timer settings that are created using the app are not visible on the display;
timer settings that are created using the operating panel or remote control are not
visible on the app! Once there is a wifi connection, you cannot create a new weekly
timer using the panel or the remote control (WEEK and SET buttons are turned off);
any existing, manually entered weekly timer settings will remain active under wifi.
Do not use both methods at the same time!!!
When the heater has logged into wifi, an automatic connection will be made when it
is switched on. The wifi symbol will be on all the time. If the wifi symbol blinks
quickly, there is no connection.
You can reset the wifi settings by pressing and holding the MODE button. Existing
connections will be deleted, the wifi symbol will begin to blink and a new connection
will be made.
You can switch off the wifi connection (and the blinking wifi symbol) by pressing
and holding the ON/OFF button. If you hear a long beep, the wifi is switched off;
the wifi symbol will go out. By pressing and holding the ON/OFF button, you will
hear a short beep to indicate that wifi is switched on again. The wifi symbol will
come back on.
Warning! After switching the heater on or off, you will hear a quiet sound. This is
normal and no reason to worry. It is just the material expanding and shrinking
during heating and cool-down.
Wi-Fi and app operation
The heater can also be controlled with an App. To do this, the heater must be
connected to a Wi-Fi modem.
Download the Eurom Smart App
- Scan the QR code below or search for ‘Eurom Smart’ in the App store or Google
Play and follow the download instructions.
