Manual Eurom Aluminium radiator 800 (page 13 of 32) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish)

591333

Zoom out

Zoom in

1/32

 Now screw the wall support loosely to the wall and mark the location of the lower screws.

 Remove the wall support again and drill the lower holes and insert plugs.

 Screw the wall support to the wall and check whether it is secure and horizontal.

 Screw the fixing bracket with the small screw underneath the radiator so that the rectangular part

sticks out.

 Now hang the radiator in the wall support and mark the location for the screw through the fixing

bracket.

 Remove the radiator from the wall and drill a hole for the fixing bracket. Insert a plug.

 Hang the radiator on the wall and secure it with a screw through the fixing bracket and into the wall.

Tighten the screw as much as possible; there will be a few centimetres between the bracket and the

wall!

Set-up and Operation

 Make sure the heater is turned off (O) and that the thermostat dial is set to maximum (clockwise, as

far as it will go). Now plug into an earthed, correctly functioning 220-240V / 50Hz socket. Only

connect the heater to an earthed socket!

 Switch the radiator on by setting the output button to I (400W) or II (800W). The ON light will come on

and the radiator will start to work. For slow heating, a small rise in temperature or a small space,

choose setting I (400W). For quick heating, a bigger temperature rise or a larger space, choose

setting II (800W).

 When the space has reached the desired temperature, turn the thermostat dial anticlockwise slowly

until you hear a click. In this position, the thermostat will maintain the current temperature by turning

the heater on and off for a top-up, if necessary. If so desired, you can now switch to a lower power

level. For higher temperatures, turn the thermostat dial clockwise, for lower temperatures

anticlockwise.

 Switch the output button to O (off) to turn off. The heater switches off, the pilot light will turn off.

Unplug.

Safety features

In case of internal overheating, the overheating safeguard will switch the heater off. This may occur if

the heater cannot give off enough heat or if it cannot draw in enough fresh air. As mentioned above, this is

generally caused by (partially) covering the heater, obstructing the air intake and/or outlet grills or

installing the heater too close to a wall or something similar. In case of overheating, switch off the heater

and unplug. Give the heater time to cool down, remove the source of the overheating and use as normal.

If the problem persists or if you have not been able to trace the source of the overheating, turn the heater

off immediately and unplug. Contact a servicing point to have the heater repaired.

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating so

these should be removed regularly. Switch off the heater, remove the plug from the socket and allow the

heater to cool down before cleaning or carrying out maintenance work.

 Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive

soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Aluminium radiator 800 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurom Aluminium radiator 800 Manual

Product: