591693
18
Zoom out
Zoom in
Previous page
1/56
Next page
18
Operation
Insert the plug into the socket. The unit is now ready for use.
- Start the unit by pressing the ON/OFF button. Pressing it again will stop the unit.
- Pressing on the Speed button allows you to choose a ventilation speed; you select a
different speed each time you press: L (low) M (medium) H (high). The corresponding
light will then come on.
- Pressing on the Mode button allows you to select a method of ventilation; you can set the
speed using the ‘speed’ button.
Normal gives a regular breeze
Natural gives a natural, irregular breeze
Sleep gives a natural, irregular breeze that switches to low speed, irrespective
of the fan speed setting, after half an hour.
- The Swing button makes the breeze swivel from left to right horizontally; the
corresponding light will come on. Pressing it again switches this function off. By adjusting
the horizontal panels manually, you can adjust the vertical outlet direction.
- Pressing the Humidify button when the unit is on will switch on the
humidification function; the corresponding light will then come on.
Pressing it again switches this function off.
- Pressing the Ion button will switch the anion generator on; the
corresponding light will come on. Pressing it again switches this function
off.
- Pressing the Timer allows you to set the required time: each press on
the button gives a further half hour, until max. 7.5 hours. Pressing it
again switches this function off. The lights indicate the set time.
Remote control
Install 2 AAA batteries in the section at the back of the remote control. You
can now operate the unit from a distance of max. 6 metres. The buttons on
the remote control correspond with those on the operating panel. The
receiver is positioned on the top left hand side of the operating panel;
always point the remote control in this direction.
Remove the batteries if the device is not going to be used for some time.
Cleaning and Maintenance
Switch off the equipment and remove the plug from the socket before cleaning or carrying
out maintenance work.
Wipe the outside of the equipment regularly with a dry or slightly damp cloth. Do not use
aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or chemical solutions!
Ensure that the operating panel does not get wet.
Use a vacuum cleaner to carefully remove any dust and dirt from the grills and ensure
that the air intake and outlet openings are clean. Be careful not to touch or damage any
internal parts during cleaning!
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Air cooler at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Air cooler in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info