Maintenance and repairs must be carried out by a EUROM authorized professional. If the
electric cable and/or electric plug is damaged, it should be replaced by the manufacturer or
its service employee or persons with similar qualifications to prevent risks.
Cleaning
Do not use:
• scouring pads;
• hard brushes;
• flammable, aggressive or chemical cleaning products.
Prevent water from entering the device. Do not immerse any part of the device
in water or other liquids.
It is recommended to clean the device after each use and prior to storage.
1. Make sure the device is switched off and the plug is removed from the power outlet.
2. Carefully vacuum all openings to remove dust and dirt.
3. Wipe the device with a damp, clean, soft, lint-free cloth or a soft brush.
4. Let the device dry completely prior to use and storage.
Filter cleaning
1. Make sure that:
• the device is switched off;
• the plug is removed from the power outlet.
2. Remove the frame (Figure 20, pos. 1 for the indoor unit and Figure 21, pos. 1 for the
outdoor unit) and remove the filter.
3. Carefully clean the filter.
4. The filter can be cleaned with clean water.
5. Let the filter dry completely before putting it back into place.
