672961
20
Zoom out
Zoom in
Previous page
1/44
Next page
8.5 To install the nozzle:
The nozzles can easily be pushed over the hot
air nozzle. Never touch the nozzles during or
immediately after use of the device. The nozzles
are very hot.
8.6 Rotating handle:
The device has two handle positions (see Fig. C)
Position 1 is suitable for killing weeds and ignit-
ing the BBQ. In position 2, the device can be
used as a hot air gun.
To change the handle position (see Fig. C):
Press the release button (3).
Turn the handle (7) to the desired position.
Make sure that the release button (3) has
been locked again.
9 Option 1: Weed Killer
9.1 Assemble the extension handle:
2
1
The extension handle consists of two parts.
Connect both parts and attach the extension
handle to the device. To attach the extension,
place the extension handle in the machine and
turn the extension handle a quarter turn to the
right. Make sure that the extension handle rmly
clicks into position. If using the device as a
weed killer you must use the extension handle.
Hold the weed killer rmly by holding the end of
the extension handle.
9.2 Use:
Ensure the extension handle is rmly xed
onto the device and that the device is
turned off.
Turn the device to position 1 (see Fig. C)
Install the nozzle (9) to destroy weeds.
Insert the plug into the socket.
Check to ensure the nozzle is not blocked
before turning the device on.
Set the temperature to setting II.
Allow the device about 45 seconds to
warm up.
To eliminate weeds, hold the nozzle over
the weeds for about 5 seconds. During
these 5 seconds the cell structure of the
weed is destroyed. As a result, the weed
dies within a few days.
It is not necessary to completely burn the
weeds, 5 seconds is more than sufcient.
For an efcient treatment the nozzle should
be held around 0 to 5 cm above the
weeds.
The effects are not visible immediately but
will take a while before they can be seen. It
is more of a long-term effect.
In the case of very leafy plants, the treat-
ment may have to be repeated several
times at intervals of 1 – 2 weeks.
10 Option 2: Paint removal
The paint removal is always done without the
use of the extension handle. Remove the exten-
sion handle by turning the extension handle a
quarter turn to the left and pull the extension
handle from the device.
The paint removal can be used for various pur-
poses, such as::
Removing old paint and gloss.
Removing self-adhesive labels.
Bonding of PVC labels.
Removing vinyl wallpaper.
Fast drying of damp equipment.
Shrink packaging.
Defrosting of water pipes.
Loosening of nuts and bolts.
20
.
7062768-Eurom-Multiheater-MA-1703-14.indb 20 14-03-17 16:04
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom 24.708.4 Electric Weedburner 3-in-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom 24.708.4 Electric Weedburner 3-in-1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info