540702
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
provided is identified for a brick wall; for another foundation please ask the specialist for
suitable material.
Check before mounting or the minimum safe mounting distances between heater and
environment are strictly followed. The distance between the bottom edge of the appliance
and the floor must be at least 2,5 meter. There must be a distance of at least 0,5 meter
between the appliance and the ceiling, roof or other cover. If the covers consist of flammable
material (p.e. wood, plaster, canvas etc.), the distance has to be at least 1 meter and if you
focus the radiator upwards, at least 2 meter. There
must be a distance of at least 1,5 meter at each
side between the appliance and walls or the like.
When you install the appliance outside, pay
attention that it doesn’t catch excessive wind load.
Fix the mounting bracket totally horizontal on the
wall with the three anchor dowels provided. The
short side of the bracket has to point upwards (see
fig.).
Assemble the appliance onto the mounting bracket
with the two winged nuts, the cable at the
underside of the appliance (see fig.).
Adjust the desired angle of radiation. The radiator
can turn 115°: from half upside till almost totally
downwards. Pay attention that the radiator doesn’t
focus its heat from a short distance at combustable
materials! The recommended number of degrees to
the mounting wall is 45 ° (see fig.)
Fasten all screws another time firmly and scheck or
the heater is firmly mounted. Now your infra red
heater is ready for use.
For personal protection the installation, to which the
EUROM GOLDEN COMFORT is connected, has to
be equipped with an earth fall device (max. 30 mAmp).
Under some circumstances it may be attractive to make a fast connection between the heater
and the main supply, and to operate the heater with a switch. Because the EUROM GOLDEN
COMFORT has a high water tightness (IP65) and for safety reasons, such a connection has to
be made by a qualified electrician.
WORKING
Check for every use:
- or the appliance doesn’t show signs of damage.
- or the appliance still is fastened firmly. Mechanical bearing pressure, oscillating duet o wind
or rain could lead to loose.
- or there are no objects, canvas, sun screens etc. are inside the safety distances.
- or the socket you want to use gives the correct tension (220-240V-50Hz) and is grounded.
If everything is all right you can insert the plug into the socket. The infra red heater will start to
work. When you use the appliance for
the first time (or after a long time again), observe it during the first 10 till 15 minutes to be sure
that is works trouble-free.
To stop the heater, take the plug out of the socket and give the heater time to cool down.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom 1300 Comfort at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom 1300 Comfort in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info