Active Matrix 5” colour TFT LCD monitor
Product specificationPhilips LCD monitor
01 July 2002
5 (6)
TLM051
6. Pinning
Electrical connector monitor (JST S20B-PHDSS) . Contra JST PHDR-20VS with JST SPHD-002T-P0.5 (pins).
Next to the general monitor connector there is a 3 pins Audio connector and mini jack 3.5 mm for Audio output.
11 V/VOUT Vertical sync pulse I/O; V output for CVBS
12 HCSH OUT Horizontal or composite sync pulse I/O, H output for CVBS
13 SYNC GND SYNC ground
14 CVBS GND CVBS ground
15 AUD GND Audio ground
16 GND Ground
17 AUD IN Audio input signal
18 VOL EXT external volume control
19 CVBS Composite video (CVBS) input
20 SUPPIN Power supply voltage 9 to 16 VDC
Notes
1. OSD default LOW with an internal 10 kΩ pull-down resistor
2. P/N signal is default LOW (10 kΩ pull-up resistor), 50 Hz mode is default
3. CVBS/RGB signal is default HIGH (10 kΩ pull-down resistor), CVBS mode is default
With RGB/CVBS LOW (GND) the RGB input is selected.
4. R/L signal is default LOW (10 kΩ), this gives left-to-right scanning direction.
R/L HIGH (+ 5 V or +12 V)gives right-to-left scanning direction.
5. B/T signal is default LOW (10 kΩ) for top-to-bottum scanning directiong.
B/T HIGH (+ 5V or +12 V) gives bottum-to-top scanning direction.