Manual Eurogarden ES-EM 1032 (page 49 of 56) (English, Italian)

724385

Zoom out

Zoom in

1/56

- 49 -

For best results, clean the lawn mower with a

brush or rag. Do not use any solvents or water

to remove dirt.

•

The cutting components - i.e. the knife cage

and lower knife blade - are subjected to more

wear and tear than any other component

of the unit. Therefore, routinely check the

condition of the blade and make sure that it

is tightly fastened. If the blade is completely

worn out, it must be immediately replaced or

ground sharp again. An excessively vibrating

mower means that the blade is not properly

balanced or has become deformed from

striking an object. In this case, the blade must

be repaired or replaced.

•

There are no parts inside the equipment

which require additional maintenance.

8.4 Replacing the blade

For safety reasons, we recommend having the

blade replaced by an authorized professional. Im-

portant. Wear work gloves! Only replace the blade

with a genuine Einhell replacement blade, as this

will ensure top performance and safety under all

conditions.

Carry out the following steps to change the blade:

1. Undo the fastening screw (see Fig. 8a).

2. Remove the blade and replace with a new

one.

3. When ﬁ tting the blade, make sure it is ins-

talled in the right direction. The blade’s air va-

nes must jut into the motor compartment (see

Fig. 8a). The dome mounts must be aligned

with the punch holes in the blade (see Fig.

8b).

4. Then retighten the fastening screw with the

universal wrench. The tightening torque

should be approx. 25 Nm.

At the end of the season, perform a general ins-

pection of the lawn mower and remove any grass

and dirt which may have accumulated. At the start

of each season, ensure that you check the condi-

tion of the blade. If repairs are necessary, please

contact our customer service center. Use only

genuine spare parts.

8.5 Ordering replacement parts:

Please quote the following data when ordering

replacement parts:

•

Type of machine

•

Article number of the machine

•

Identification number of the machine

•

Replacement part number of the part required

Spare blade art. no.: 90.600.47

9. Disposal and recycling

The equipment is supplied in packaging to pre-

vent it from being damaged in transit. The raw

materials in this packaging can be reused or

recycled. The equipment and its accessories are

made of various types of material, such as metal

and plastic. Never place defective equipment in

your household refuse. The equipment should

be taken to a suitable collection center for proper

disposal. If you do not know the whereabouts of

such a collection point, you should ask in your

local council oﬃ ces.

10. Storage

Store the equipment and accessories out of

children’s reach in a dark and dry place at above

freezing temperature. The ideal storage tempe-

rature is between 5 and 30 °C. Store the electric

tool in its original packaging.

Anl_ES_EM_1032_SPK7.indb 49Anl_ES_EM_1032_SPK7.indb 49 29.11.2018 15:34:5829.11.2018 15:34:58

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurogarden ES-EM 1032 in the language / languages: English, Italian as an attachment in your email.

The manual is 3,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurogarden ES-EM 1032 Manual

Product: