Manual Eurochron WS1080 (page 65 of 104) (English, German)

689520

Zoom out

Zoom in

1/104

• The connection chart for illustration:

The wind speed sensor is connected to wind direction sensor. It in turn is connected to the socket „WIND“

of the temperature/humidity sensor.

The receiver is connected to the socket „RAIN“ of the solar module. The solar module is connected to the

socket „RAIN“ of the temperature/humidity sensor.

• Fasten the metal rod to the sensors in the outdoor area at a suitable location. A second included metal rod is used

as extension.

Important!

The wind direction sensor has markings for the cardinal points („S“ = South, „N“ = North, „W“ = West, „E“ =

East).

Attach the metal rod with the sensors on it so that the „N“ mark points due North. The correct directions can

be determined with a compass (e.g. integrated in some smartphones or can be downloaded as an app).

If you do not have a compass, you may also use a map or map material from the internet to perform at least

approximate alignment.

Reference the bubble level (See arrow in the picture) on the rain

sensortomakesure therainsensoris completely levelupon-

nal installation. Failure to do so will result in inaccurate rain gauge

readings.

Observe the following for selection of the mounting site:

The mounting site must be exposed for wind speed and wind direction to be measured correctly. A mini-

mum distance to buildings of 10 metres is recommended.

Do not mount the outdoor sensor under or close to trees or bushes because dropping foliage may clog the

opening in the rain sensor.

The range between the transmitter of the temperature/humidity sensor and the weather station is up to

100 m in a free range (at a direct line of sight between transmitter/receiver).

The range that can actually be achieved, however, is much lower since there are walls, furniture, windows

or plants between the weather station and the outdoor sensor.

Another interference that strongly reduces range is proximity to electrical/electronic devices, cables or

metal parts. Another problem are reinforced concrete ceilings, metal-vaporised isolating glass windows or

other devices on the same transmission frequency.

 Beforermlyattachingthemetalrodwiththeoutdoorsensors,youshouldperformafunctionandreception

test. After inserting the batteries into the outdoor senor and weather station (see chapter 10), the corre-

sponding measured values should be displayed after several minutes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eurochron WS1080 in the language / languages: English, German as an attachment in your email.

The manual is 1,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eurochron WS1080

Eurochron WS1080 User Manual - French - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eurochron WS1080 Manual

Product: