689520
62
Zoom out
Zoom in
Previous page
1/104
Next page
62
8. Assembly of the Outdoor Sensors
The temperature/humidity sensor and the wind and rain sensor and the solar module all can be installed on the
included mast holder.
All components are wired to the temperature/humidity sensor, the transmitter for radio transmission of all measured
data is integrated in the temperature/humidity sensor.
This means that not only can all sensors be very easily installed at one location of your premises, but a total of
2rechargeablebatteriestypeAA/mignonaresufcientforallsensors.signingonofthesensorstotheweatherstation
is much easily than in other weather stations because of this.
Proceed as follows to assemble and mount the outdoor sensors:
• First remove all components of the outdoor sensors from the packaging.
• Plug the wind speed sensor into one of the two sockets on the plastic Y holder and fasten it with a long screw (A)
and a nut (D).
Observe that the tab at the wind speed sensor is guided precisely into the Y-holder slot (see arrow in the right
gure),sincethescrewcanotherwisenotbepushedthrough.
• Then the wind direction sensor must be plugged into the sec-
ond socket of the plastic Y-holder; again, observe that the tab at
the wind direction sensor is guided precisely into the Y-holder’s
slot.
Fasten the wind direction sensor to the Y-holder with a long
screw (A) and a nut (D).
• The wind speed sensor has a short, thin cable with a Western
plug.
Connect the Western plug to the corresponding socket at the
bottom of the wind direction sensor so that it latches.
The cable can be attached to the cable brackets at the bottom
of the Y-holder.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurochron WS1080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurochron WS1080 in the language / languages: English, German as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eurochron WS1080

Eurochron WS1080 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info