755764

Eufy Smart Lock Front Door Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
12 English English 13
SETTING UP THE SMART LOCK
Pair Your Phone with Smart Lock
Note: The lock will not lock automatically before the setup has completed. To avoid
being locked outside, pair your phone with the Smart Lock and set an access
code for unlocking the door.
To pair your phone with the Smart Lock:
1. Scan the QR code on the back of the Smart Lock to get Bluetooth information of the
Smart Lock. Follow the on-screen instructions to complete the setup.
2. Pair your phone with the Smart Lock via Bluetooth. Your phone will search for the
Smart Lock’s Bluetooth and then connect.
• Waiting to pair: The LED indicator ashes blue.
• Paired: the LED indicator turns steady blue for 5 seconds.
Note:
• The user that is paired is the only administrator and can authorize other users
to use the lock.
• Press and hold the Setup button again, the lock will return to default settings.
All the settings will be erased and need to be reset. DO NOT press and hold
the button if unnecessary.
Calibrate Smart Lock
After the Smart Lock is successfully paired with your phone, the eufy Security app will
prompt you to calibrate the door lock.
Make sure you close the door before calibrating the Smart Lock. When the door is closed,
the door sensor will record the exact locked position so that the door will automatically
lock if the door is properly closed.
To calibrate the Smart Lock, follow the on-screen instructions to complete the process.
• Successfully calibrated: The button LED turns white for 2 seconds and then off.
The voice prompt “calibration complete” can be heard.
• Fail to calibrate: The button and status LED turn solid red for 2 seconds and then
off. The voice prompt “The deadbolt is stuck. Please return to the installation and
try again.” can be heard.
Note: If the eufy Security app fails to calibrate the lock, check whether the door has
been installed correctly and try again.
Set Access Code
After the lock is calibrated, the eufy Security app will prompt you to name your Smart
Lock and set an access code. Follow the on-screen instructions to complete the process.
The access code should be 4 to 8 characters.
Note: If you do not set the passcode and click “Return”, a message “initialization
unsuccessful” will appear. Click the card to enter the Smart Lock page. The
message “Continue or remove the device” will appear.
Set Scramble Passcode
A scramble passcode is a series of random numbers that you can input to prevent
others from spying on your actual access code. It is ideal for those living in a condo with
neighbors passing by all the time.
To set a scramble passcode, go to Settings on the eufy Security app. The scramble
passcode should be no more than 12 digits in total.
Example
Access Code: 123456
Scramble Passcode Method
1. 123456xxxxxx
2. xxxxxx123456
3. xxx123456xxx
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy Smart Lock Front Door at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy Smart Lock Front Door in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info