783789

Eufy RoboVac X8 - T2262 Manual

11
Zoom out
Zoom in
Previous page
1/160
Next page
18 19
English English
• If RoboVac is not used for a long time, to preserve the battery’s lifespan,
recharge at least once every 6 months.
• When RoboVac is being charged, to enter Reduced Power Standby mode
for power-saving, simultaneously press and hold the three buttons (
& & ) on RoboVac for 10 seconds until the lights turn off. Wi-Fi
is disabled while this mode is active. Press to exit Reduced Power
Standby mode.
Auto Recharge and Resume
RoboVac returns to the Charging Base automatically to recharge when:
• RoboVac has finished cleaning;
• Cleaning is not complete and the battery level becomes low; Once recharged to
80% battery capacity, RoboVac will resume to finish the remaining cleaning.
Do not move the Charging Base during cleaning, otherwise RoboVac may
fail to return for recharge. If failed, you have to manually attach it to the
Charging Base. If the Charging Base is moved, start cleaning from the new
location. RoboVac will automatically return when it has finished cleaning.
Using Your RoboVac
Turn on / off
• RoboVac turns on automatically when attached to the Charging Base and connected
to power.
• When RoboVac is not on the Charging Base, press and hold for 3 seconds to
turn on the main unit. Wait until the Power Status Light turns solid blue.
• When RoboVac is not on the Charging Base, press and hold for 3 seconds again
to turn off the main unit.
Start cleaning
RoboVac cannot start cleaning if the battery level is low. In this case,
recharge RoboVac first before cleaning.
1
Press
to start cleaning in Auto Mode.
RoboVac moves around to scan the environment and builds a map
automatically.
2
Press again to pause cleaning.
Press to resume cleaning.
When cleaning is paused, docking RoboVac onto the Charging Base will stop
the cleaning.
If cleaning is paused for 10 minutes, RoboVac automatically stops cleaning and
switches to sleep mode.
3
Press to stop current cleaning and return to the Charging Base.
Before cleaning, tidy cables and cords to avoid power interruption or any
damage caused by pulling the cord during cleaning.
Use Your RoboVac with the EufyHome App
To fully enjoy all the available features, it is recommended to control your RoboVac via
the EufyHome app.
Before you start, make sure that:
• Your smartphone or tablet is running iOS 9.0 (or above) or Android 5.0 (or above).
• The 2.4GHz band wireless signal is enabled on your wireless router.
• The Wi-Fi status light on RoboVac is slowly flashing blue.
• Your smartphone or tablet has enabled Bluetooth to ensure a better connection.
• RoboVac has enough power during setup.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy RoboVac X8 - T2262 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy RoboVac X8 - T2262 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 13.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info