796845

Eufy RoboVac LR20 - T 2192 Manual

9
Zoom out
Zoom in
Previous page
1/57
Next page
14 EN EN 15
Real-Time Mapping and Floor Plan
Real-time mapping helps RoboVac easily learn the environment of your home to
generate the most ecient cleaning path. A floor plan will be built after cleaning.
The map will be updated in real-time during each cleaning session to ensure normal
navigation.
To create a complete floor plan:
1. Open your doors so that RoboVac can map each room.
2. Remove any objects that may be in the way or that might entangle RoboVac.
Repositioning and Remapping
If the position of RoboVac / Charging Base is adjusted or the surroundings are
changed significantly, RoboVac will try to reposition and remap to match the
surroundings.
• If the repositioning is successful, RoboVac will resume cleaning.
• If the repositioning fails, RoboVac will remap to ensure normal navigation with a new
cleaning.
• When using for the first time, make sure RoboVac starts cleaning from the
Charging Base.
• During cleaning, do not move RoboVac frequently. If moved, place RoboVac
back to the original position.
Using Your RoboVac
Important Tips Before Use
A
D
B
E
C
F
Remove power cords and small objects from the floor that may entangle RoboVac.
Fold tasseled edges of rugs underneath to prevent tangling RoboVac. Avoid
cleaning dark-colored high-pile rugs or rugs thicker than 1.02 in / 26 mm as they
may cause RoboVac to malfunction.
It is strongly recommended to set a No-Go zone or a virtual boundary in the eufy
Clean app in front of fireplaces and certain areas (i.e. air vents) that may cause
damage to RoboVac if entered.
Keep RoboVac away from wet areas during cleaning.
RoboVac may climb on top of objects less than 0.79 in / 20 mm in height.
Remove these objects if possible.
Anti-drop sensors will prevent RoboVac from tumbling down stairs and steep
drops in most cases. Sensors are less effective if dirty or used on carpeted,
reflective, or dark-colored floors. It is recommended to place physical barriers or
set a No-Go zone / a virtual boundary in the eufy Clean app to block off areas
where RoboVac may fall.
Preparation
1
Remove the foam blocks beside the bumper before use.
2
Place the Charging Base on a level surface and against a wall.
3
Remove objects within 1.6 ft / 0.5 m of the left and right side and within
4.9 ft / 1.5 m of the front of the Charging Base. If you cannot remove the objects,
move RoboVac to a new place and check whether RoboVac can return to the
Charging Base normally; if not, contact eufy customer service for help.
4
Connect the adapter to the Charging Base and a wall outlet.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy RoboVac LR20 - T 2192 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy RoboVac LR20 - T 2192 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info