807216

Eufab 21076 Manual

8
Zoom out
Zoom in
Previous page
1/24
Next page
8
6. Operating instructions
6.1 Overview
1 Carry handle
2 Manometer
3 On/O switch for 12 V mode
4 On/O switch for 230 V mode
5 Cable for 12 V vehicle connection
(230 V cable not visible on image)
6 Valve connection for air hose
7 Storage compartment lid
8 Fuse holder (230 V)
Figure 1: Front view Figure 2: Rear view
Figure 3: View of adapters and fuses
Figure 4: Side view
9 Replacement fuse (12 V)
10 Adapter Ø 8 mm
11 Adapter Ø 5 mm
12 Ball adapter
13 Replacement fuse (230 V)
14 Ventilation slots
In order to be able to work with the compressor, rst take the air hose (Position 6 in the overview) and the connection cable
(Position 5 in the overview) from the storage compartment (Position 7 in the overview).
Connect the compressor to the power supply. Either to the 12 V connection in your vehicle or to a 230 V household connection.
Switch the compressor on to ll. When connecting to a 12 V vehicle socket, press the right switch (Position 3 in the over-
view) on the front of the device. When connecting the compressor to the 230 V household network, press the left switch
(Position 4 in the overview).
Open the lock on the valve
connection Lock the valve connectionPlace the valve connection
on the valve You can now ll the tyre using
the compressor
CAUTION: Do not connect the compressor to both the 230 V household connection and the 12 V socket
of your vehicle at the same time.
6.2 Operating the compressor
6.2.1 Filling a tyre using the car valve (Schrader valve)
Make sure that the compressor is switched o before connecting it (both switches, Positions 3 and 4 in the over-
view, may not be pressed).
Figure 5 Figure 7Figure 6 Figure 8
The manometer (Position 2 in the overview) is designed to monitor the air pressure. When the desired air pressure is re-
ached, switch o the compressor by pressing the appropriate On/O switch. Remove the valve connection in reverse order
(Figures 8 – 5).
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 21076 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 21076 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info