807215
4
Zoom out
Zoom in
Previous page
1/12
Next page
4
1. TECHNICAL DATA
• Operational voltage: 12 Volt
• Maximum pressure: 17 bar / 250 PSI
• Power supply: 12 Volt
• Size (L x W x H): Approximately 15 x 6.5 x 13 cm
Weight: Approximately 620 g
• Accessories: 3 adapters
2. OPERATING INSTRUCTIONS
Universal use, for example, for pumping up car,
motorcycle and bicycle tyres with car valve, sports balls,
in atable toys.
MINI COMPRESSOR
1. Do not increase the air pressure above the manufac-
turer recommendation!
2. Protect the compressor and its components from
damp!
3. Do not leave the operating compressor unattended!
4. Keep children away and do not permit children to use
this device!
5. Only use this product for the intended use!
6. Do not manipulate or disassemble the compressor!
7. If the compressor makes unusual noises or overheats,
switch o immediately and allow at least 30 minutes
to cool down. When operating for a longer period of
time, switch o after 10 minutes, leave to cool for 30
minutes!
8. Check the compressor before use. Any damaged, cra-
cked or broken components should be maintained by
quali ed technicians only!
1. Manometer
2. Handle
3. Air slot
4. Cable holder
(for winding)
5. 12 Volt adapter
WARNING!
These instructions are designed to
give information about the functions
and performance.
Keep these instructions as reference
material for future use. Before using
the device for the  rst time, check
the contents of the box for integrity
and completeness!
9. Never expose the compressor to frost, rain or tempe-
ratures over 30° C or under – 30° C!
10. Never use on people or animals!
11. Make sure that the hose and cable are not exposed to
sharp edges, oil or objects that are too hot!
12. Warning! For your own safety, only use accessories
or replacement parts speci ed in the instructions or
that the manufacturer has recommended!
Pumping up car or bicycle tyres
Pumping up sports equipment (e.g. basket balls)
or balloons
1. Undo the 12 Volt cable.
2. Fit the car valve adapter to the valve.
3. Start the compressor by connecting the 12 Volt adap-
ter with the 12 Volt connection of your vehicle. Wait
until the required tyre pressure has been achieved.
4. Separate the 12 Volt connection from the vehicle and
remove the car valve adapter from the tyre valve.
1. Undo the 12 Volt cable.
2. Screw the ball/balloon adapter to the threaded
connector at the hose end.
3. Insert the ball/balloon adapter into the valve of the
object you wish to pump up.
4. Start the compressor by connecting the 12 Volt adap-
ter with the 12 Volt connection of your vehicle. Wait
until the desired  rmness has been achieved or the
object is completely pumped up.
5. Remove the adapter from the valve of the pumped
up object and unscrew to the remove the threaded
connector at the hose end.
6. To switch o the compressor, separate the link with
the 12 Volt connection.
NOTE
Check the tyre pressure of your vehicle
using the recommended values in the
operating instructions to avoid over
pressure. Bicycle tyres should be checked
using the tyre designation.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 21068 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 21068 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info