807213

Eufab 21065 Manual

5
Zoom out
Zoom in
Previous page
1/16
Next page
CAUTION
Read the operating instructions carefully before using for the first time! Failure to
do so may result in injury to persons or damage to your property including the
device itself!
1. Do not exceed the maximum air pressure stated by the manufacturer!
2. Do not expose the compressor and any of its components to damp!
3. Do not operate the compressor unsupervised!
4. Keep out of reach of children and do not let children operate this device!
5. Do not use this device for any reason other than its intended use!
6. Do not alter or dismantle the compressor!
7. Should the compressor make unusual noises or start to overheat, turn it off and let it cool
down for at least 30 minutes!
8. Check the compressor before use. Damaged, torn or broken components should be
replaced or repaired by qualified personnel only!
9. Do not expose the compressor to frost, rain or temperatures over 30°C or under –30°C!
10. Never use on people or animals!
11. Ensure that the hose and cable are not exposed to sharp edges, oil or hot objects!
12. Caution! For your own safety, only use those accessories or replacement parts stated in the
instructions or which are recommended by the manufacturer!
CAUTION
These instructions are intended to provide you with information regarding
function and performance. Please retain these instructions for future reference.
Check the contents of the box for damage and completeness before using for the
first time!
Operating Instructions
Inflating car or bicycle tyres
1. Unwind the 12 volt cable and connect the 12 volt adapter with the 12 volt socket of your
vehicle.
2. Screw the threaded connector on the end of the hose onto the tyre valve.
3. Start the compressor by operating the switch (3), until the desired tyre pressure has been
reached. Switch off the compressor.
4. Disconnect the 12 volt connection from the car and remove the threaded connector from the
tyre valve.
Please note: Check the tyre pressure of your vehicle against the recommended values in the
operating instructions to avoid excess pressure. Please check bicycle tyre pressure according
to tyre designation.
Inflating sports equipment (e.g. basket balls) or balloons
1. Unwind the 12 volt cable and connect the 12 volt adapter with the 12 volt socket of
your vehicle.
2. Screw the ball/balloon adapter into the threaded connector on the end of the hose.
3. Attach the ball/balloon adapter to the valve of the object being inflated.
4. Start the compressor by operating the switch (3), until the desired firmness has been
reached or the object is completely inflated. Switch off the compressor.
5. Remove the adapter from the valve of the inflated object and unscrew the threaded
connector on the end of the hose.
6. Disconnect the 12 volt connection from the car and place the cable in the storage
compartment.
Please Note: The manometer only provides an estimate of pressure during inflation, an exact
reading cannot be made.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 21065 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 21065 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info