807587

Eufab 11619 - SD260 Manual

31
Zoom out
Zoom in
Previous page
1/68
Next page
31
Cleaning and maintanance
Under normal conditions and use, the bike carrier only requires
cleaning, and is otherwise maintenance free.
Clean the bicycle carrier regularly when used in coastal areas or
in winter conditions in order to wash o any salt and prolong the
service life of the bicycle carrier.
The bike carrier can be cleaned with a mild cleaning agent, with
warm water and/or a soft cloth. First remove any coarse dirt and
dust.
Do not use any solvents or similar cleaning agents, since these can
damage the bike carrier.
Leave the bike carrier to dry on its own. Do not use any electrical
driers or other heating equipment to speed up the drying process.
Clean the bike carrier regularly when used in coastal areas or in
winter conditions in order to wash o any salt and prolong the
service life of the bike carrier.
Store the bike carrier in a dry and protected area when not used for
extended periods (e.g. over winter) in order to prolong the service
life of the bike carrier.
Always slide the bicycle carrier back into the transport position so
no dirt or dust can remain in the sliding mechanism and limit a
smooth sliding. In case of fouling of the sliding mechanism, rinse it
with water.
Check the bike carrier for wear before the start of every journey.
Defective parts and straps must be replaced.
The steel parts of the bike carrier are protected in the works against
corrosion by a powder coating. If this paint coating is damaged,
please have the damage rectied professionally as soon as possible.
Please refer to our customer service for the replacement of parts.
Any modication of original parts and materials or the construction
of bike carrier can adversely aect its safety and serviceability.
Remove the bike carrier from the trailer coupling, as described
under “Dismantling the bike carrier”.
4
Check whether the carrier is now rmly seated on the trailer
coupling, as described under “Fitting the bike carrier to the
trailer coupling”. If not, repeat the above steps.
4
Loosen the locking nut slightly (g. 1).
4
Screw in the setting screw one quarter of a turn (g. 1).
4
Tighten the locking nut (g. 2)
4
Adjustment of the quick release fastener
Carry out this maintenance operation only if the bike carrier cannot
be tted rmly to the trailer coupling, as described in the chapter
“Fitting the bike carrier to the trailer coupling”.
Disposal
Due to its lighting system, the bicycle carrier is an
electrical device.
Do not dispose of electrical appliances in household
waste! Discarded electrical and electronic
equipment must be collected separately and
recycled in an environmentally sound manner.
Contact your municipal or city government on how
to dispose of old electronic equipment.
The materials are recyclable. You are making an
important contribution to protecting our
environment through recycling, material recycling
or other forms of re-utilising old appliances!
Dispose of the bicycle rack in accordance with the
laws and conditions in your country.
1
3.
1.
2.
SW18
2
2.
1.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 11619 - SD260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11619 - SD260 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 11.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info