Manual Eufab 11601 - PROBC2 plus (page 20 of 52) (English, German, French, Italian)

807577

Zoom out

Zoom in

1/52

NOTE

Slight signs of pressure on the tow bar ball are normal and do

not inuence the functionality.

5.4 ADJUSTMENT OF THE QUICK LOCK

• Remove the bicycle carrier from the trailer tow bar as described in Section

5.8, “Removing the bicycle carrier from the trailer tow bar”

• Loosen the lock nut a little (Figure 15).

• Screw in the setting screw one quarter of a turn (Figure 15).

• Tighten the locking nut (Figure 16).

• Check that the carrier is now rmly positioned on the trailer tow bar, as

described in “Mounting the bicycle carrier onto the trailer tow bar”. If not,

repeat steps described above.

Only do this if the bicycle carrier cannot be mounted rmly to the trailer

tow bar, as described in section 5.3, “Mounting the bicycle carrier onto the

trailer tow bar”.

5.5 CONNECTING THE ELECTRICAL CABLE

Insert the plug of the electrical cable of the bicycle carrier into the mains

socket of your vehicle. Read the instructions for your vehicle or tow bar.

• Check the correct operation of the lighting system before

each trip.

• Replace any defective bulbs if necessary.

• Check the connection between the plug and tow bar.

WARNING!

Personal injury due to not being seen by other road

users.

Driving without a functioning lighting system can lead to

accidents.

Figure 13: Locking the quick lock

Figure 14: Fastening the quick lock

Figure 12: Closing the quick lock

400N~

40 kg

Figure 15: Adjustment of the quick lock

Figure 16: Adjustment of the quick lock

SW18

1. 2.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11601 - PROBC2 plus in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 9.66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eufab 11601 - PROBC2 plus Manual

Product: