Manual Eufab 11576 (page 7 of 16) (English, German, French, Italian)

807252

Zoom out

Zoom in

1/16

5.2 Mounting the frame holder (11575, 11576, 11577 and 11578)

Rotate the frame mount anti-clockwise until the locking mechanism is extended suciently

that the U-shaped bracket cu can be opened, Figure 2. Open the U-shaped bracket cu and

place it around the shaft of the U-shaped bracket. Close the U-shaped bracket cu and push

the locking mechanism down. Rotate the frame mount clockwise to such an extent that the

clip can no longer be opened. Align the frame holder in such a way that it is roughly parallel

to the direction of travel. Now turn the frame mount to tighten the frame holder.

Figure 2: Assembly of frame holder Figure 3: Locking and release lever

Locking lever

Release lever

Press the locking lever, Figure 3, down and pull the strap (Position 4 in the overview) out of

the lock. Wrap the strap around an appropriate point of the bicycle frame and insert back into

the lock. Tighten the strap lightly. Arrange the frame protector (Position 5 in the overview)

in such a way that the bicycle frame does not rub up against the strap during the journey.

Tighten the strap by moving the locking lever backwards and forwards, Figure 3.

If your bicycle has a carbon frame, make sure to not tighten the strap too rmly,

since this may damage the frame.

No electrical or brake cables may be crushed.

5.3 Assembling the frame holder (11579)

Press the locking lever, Figure 3, down and pull the strap (Position 4 in the overview) out of the

lock. Repeat this procedure on the other side of the frame holder as well. Wrap the strap around

an appropriate point of the second bicycle frame and insert back into the lock. Tighten the strap

lightly. Arrange the frame protector (Position 5 in the overview) in such a way that the bicycle

frame does not rub up against the strap during the journey. Now place the third bicycle on the

bicycle rack. Wrap the strap of the other end of the frame holder around an appropriate point

of the third bicycle frame and insert back into the lock. Tighten the strap lightly. Here, align the

frame protector correctly. Tighten the strap on the second bicycle by moving the locking lever

backwards and forwards, Figure 3. Then tighten the strap on the third bicycle.

CAUTION: Before travelling, you must rst secure the bicycle in accordance with the

instructions of your bicycle rack (tensioning straps, safety strap etc.)

The frame holder may result in minor pressure points on the bicycle frame and dama-

ged to the paintwork. Protect the bicycle frame, for example, using protective lm.

Lock the lock of the frame holder to protect your bicycle against theft.



Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11576 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eufab 11576 Manual

Product: