Fold open the bicycle rack as shown in the following Figures.
To fold together, proceed in reverse order. You can also fold in the U-shaped bracket. To do this, undo both knob nuts so that the U-shaped bracket can be
folded down at onto the rack table.
5.3 Dismantling the bicycle rack
1. Fold out the right rear light
3. Fold out the right wheel rail
2. Fold out the left rear light
4. Fold out the left wheel rail
The rst bicycle is placed in the rst bicycle rail (closest to the vehicle) and secured to the U-shaped bracket with the short frame holder. To do this, use the
side of the frame holder with the tensioning strap to secure to the bicycle frame. The wheels are secured by placing the tensioning straps around the wheel
rim of your bicycle and tightening the straps. Caution: The front wheel must be secured with two small tensioning straps to prevent it from turning (Figure
14). The second bicycle is usually placed in the second rail, facing the opposite direction and secured to the U-shaped bracket with the long frame holder. The
wheels are secured in the same way as for the rst bicycle. It may be necessary to oset the individual bicycles dierently on the rack to ensure that the frame
holders may be correctly secured. Now secure the bicycles with the long safety strap. Wrap the safety strap through the bicycle frames and the U-shaped bar
and tighten. (See Figure 15)
Insert the short tensioning strap from the inside to the outside below the bike holder and then from the outside to the inside through the slots of the bike
holder (Figure 13). For the rear wheel of the bicycle, use the centre slot of the wheel holder, for the front wheel, use the two outer slots (two tensioning straps
to prevent the front wheel from turning).
5.4 Mounting the short tensioning straps
5.5 Mounting the bicycles to the rear rack
Without this safety strap, the
bicycle rack may not be used.
Figure 12: 6 x Short tensioning strap
Figure 14: Tensioning straps for front wheelFigure 15: Safety strap
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eufab 11563 - Crow at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eufab 11563 - Crow in the language / languages: English, German, French, Italian as an attachment in your email.
The manual is 1.68 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
