807224

Eufab 11535 Bike Lift Manual

42
Zoom out
Zoom in
Previous page
1/84
Next page
42
Maintenance
Disposal
Contact
Remove the bicycle carrier from the tow hitch, as described
under Removal.
4
Check that the carrier is now sitting rmly on the tow hitch, as
described under Fitting. If not, repeat the steps described above.
4
Pull o the protective dust cap.
4
Tighten the adjusting screw by a quarter turn.
4
Tighten the locknut.
4
Loosen the locknut a little, as shown in the illustration.
4
Before each journey, check the bicycle carrier for wear. Defective
metal parts and tension belts in particular must be replaced.
To replace the parts, contact our customer service.
Any change to original parts and materials or to the structure of the
bicycle carrier may impair safety and performance.
The steel parts of the bicycle carrier have been protected from cor-
rosion by powder coating in the factory. If this layer of paint is da-
maged, ensure that the damage is rectied professionally as soon as
possible.
Under normal conditions, the bicycle carrier requires only cleaning
and is otherwise maintenance-free.
Adjusting the quick-release mechanism.
Perform this maintenance only if the bicycle carrier cannot be tted
rmly on the tow hitch as described in the chapter on Fitting. Due to its lighting system, the bicycle carrier is an
electrical device.
Do not dispose of electrical appliances in household
waste! Discarded electrical and electronic equip-
ment must be collected separately and recycled in
an environmentally sound manner.
Contact your municipal or city government on how
to dispose of old electronic equipment.
The materials are recyclable. You are making an
important contribution to protecting our environ-
ment through recycling, material recycling or other
forms of re-utilising old appliances!
Dispose of the bicycle rack in accordance with the
laws and conditions in your country.
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany info@eal-vertrieb.com
www.eal-vertrieb.com
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
Maintenance / Disposal / Contact
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 11535 Bike Lift at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11535 Bike Lift in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 10.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info