807239

Eufab 11412 - Bike Three Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
10
Tighten the M16 screw slightly and align the bicycle rack parallel to the rear
of the vehicle. Now tighten the M16 screw in such a way to ensure that the
rack is securely attached and can no longer be rotated.
Regularly check the  rm seating of the rack on the trailer tow bar as well as
the functionality of the lighting systems.
5.2 MOUNTING THE BICYCLE RACK ON THE TRAILER TOW BAR
Make sure that the trailer tow bar is undamaged, clean and grease-free.
The bicycle rack is placed horizontally on the tow bar from above.
Slight signs of pressure on the tow bar ball are
normal and do not in uence the functionality.
CAUTION
The front wheel must also be secured with a small
tensioning strap to prevent it from turning.
The second bicycle is placed in the second rail, facing the opposite
direction and secured to the U-shaped bracket with the short frame holder.
The wheels are secured in the same way as for the  rst bicycle. The third
bicycle is positioned in the third rail, counter to the second. With the frame
holders, wheel to wheel, connect the frame of the third bicycle to that of
the second. The wheels are again secured in the same way as for the  rst
bicycle. It may be necessary to arrange the individual bicycles di erently
on the rack to ensure that the frame holders may be correctly secured. Now
secure the bicycles with the long safety strap. Wrap the safety strap through
the bicycle frames and the U-shaped bracket and tighten. Disassemble in
reverse order.
5.3 MOUNTING THE BICYCLES TO THE RACK
The  rst bicycle is placed in the  rst bicycle rail (closest to the vehicle) and
secured to the U-shaped bracket using the short frame holder. The wheels
are secured by pushing the stoppers up to the wheel and securing with the
straps.
Safety strap
The bicycle rack may not be used without this safety
strap.
When transporting e-bikes, the payload of the
bicycle carrier and the maximum load capacity of each
individual bicycle rail must not be exceeded.
6. MAINTENANCE AND CARE
• After use, store the bicycle rack in a clean and dry place. Wash any mud or
other dirt o using water.
• Keep the rack tow bar clean and free of grease.
• Check the bicycle rack regularly for damages. Damaged or worn parts must
be replaced immediately. Only original replacement parts may be used.
• Check the bolts and nuts of the bicycle rack regularly and tighten when
necessary.
• Immediately treat any damage to paintwork with paint.
• Regularly lubricate rotating and moving parts.
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Due to its lighting system, the bicycle carrier is an electrical
device.
Do not dispose of electrical appliances in household waste!
Discarded electrical and electronic equipment must be col-
lected separately and recycled in an environmentally sound
manner.
Contact your municipal or city government on how to dispose
of old electronic equipment.
The materials are recyclable. You are making an important
contribution to protecting our environment through recycling,
material recycling or other forms of re-utilising old appliances!
Dispose of the bicycle rack in accordance with the laws and
conditions in your country.
If you transport an e-bike on rails 1 or 2, the other bikes
must be correspondingly lighter so that the bike carrier is not
overloaded. Before loading, determine the weight of each
bicycle (e.g. using a personal scale).
5.3.1 TRANSPORT OF EBIKES
Mount e-bikes only on the bicycle rails 1 and 2, see picture.
Maximum load capacity of the bicycle rails:
rail 1: 25.0 kg
rail 2: 15.0 kg
rail 3: 15.0 kg
Load the bike carrier so that the maximum payload is not exceeded. See
section 3. Speci cations.
Mount e-bikes only on the bicycle rails 1 and 2, see picture.
Maximum load capacity of the bicycle rails:
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 11412 - Bike Three at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11412 - Bike Three in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info