807222

Eufab 11233 Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
6
Operating instructions
1 Lockable knob nut
2 Spacer
3 Frame clip
4 Lock screw M8
5 Tube
6 U-bracket cu
7 Plug
8 Rubber inserts Ø 25 mm and Ø 30 mm
Mounting the frame holder
Before you can use the lockable frame holder, you must rst dismantle it. First unscrew the knob nut. Now remove the spacer and the frame
clip. Place the thread of the lock screw onto a rm surface and carefully push the tube in the direction of the surface. The screw head will now
push the plug out of the U-bracket cu. Pull the lock screw out completely. Wrap the appropriate rubber insert for your bicycle rack around the
U-bracket at a suitable position for your bicycle. Open the bracket cu and place it around the rubber insert. Push the bracket cu to close. The
rubber insert may not be folded or crushed as you do so. Replace the lock screw. First t the frame clip and then the spacer onto the threaded
end of the lock screw. The curved side of the spacer must face the frame clip. Push the frame clip together and push in the direction of the bra-
cket cu to expose sucient thread of the lock screw. Now put the knob nut onto the thread and then tighten securely to ensure that all parts
are tted and brought together. Insert the plug back into the top of the bracket cu.
Securing a bicycle using the frame holder
Rotate the knob nut anti-clockwise until the frame clip has opened suciently to accommodate the bicycle frame. Insert the bicycle frame
into the frame clip. Rotate the knob nut clockwise until the frame clip loosely encompasses the bicycle frame. Align the bicycle and the frame
holder to ensure that it all ts together. Now tighten the knob nut rmly.
You can only lock the frame holder when it has been closed securely.
Insert the key into the lock of the knob nut and turn so that the red marking faces the lock icon. Remove the key. Your bicycle is now secured to
prevent theft.
CAUTION: Before travelling, you must rst secure the bicycle in accordance with the instructions of your bicycle rack (tensioning
straps, safety strap etc.)
Maintenance and care
Clean the frame holder using a slightly moist, soft cloth and a mild cleaning agent. Do not use aggressive cleaning agents, solvents or petrol.
Ensure that no cleaning agents or liquids enter the tube of the frame holder.
Occasionally lubricate the lock with a resin-free oil, e.g. WD40.
Store the frame holder in a dry place.
Notes regarding environmental protection
Please dispose of this device via the recycling bin or the public/municipal collection points.
The materials are recyclable. You make an important contribution to protecting our environment by recycling, material utilisation or other
forms of reusing waste equipment!
Contact information
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal
Germany
Telephone: +49 (0)202 42 92 83 0
Fax: +49 (0)202 42 92 83 160
Internet: www.eal-vertrieb.com
Email: info@eal-vertrieb.com
1
2
4
8
6
5
7
3
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 11233 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11233 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info