499883
42
Zoom out
Zoom in
Previous page
1/48
Next page
461307055 (A-000)
20
3. ISTRUZIONI PER L’UTENTE
1
2
PL
A
B
PF
V
C
V
16
15
14
13
GB INSTRUCTIONS FOR THE USER
OVEN SIDEWALL GRIDS (fi g. 13)
To allow for a better cleaning of the side grids, you can extract
them this way:
Push with a fi nger on the last of the slots to release the grid
from its hold (A).
Lift it towards the top and extract the grid.
To put them back into place, reverse the order of this
operation.
SELF-CLEANING PANELS - only certain versions
Oven walls are protected by panels coated with a grease-proof,
microporous enamel that absorbs and eliminates splattering
during baking.
If there is a lot of liquid or grease, dry immediately with a
damp sponge and heat the oven for 2 hours on the maximum
thermostat position. Wait for the oven to cool down and then go
over it again with a damp sponge. If you are unable to remove
all the substances, repeat the above procedure.
It is, however, advisable to periodically remove the panels and
wash them with warm soapy water and dry them with a soft
cloth.
To remove them follow these instructions:
Extract the side grids as indicated in the previous
paragraph.
Remove both side panels (PL) (fi g. 14).
Remove back panel by unscrewing respective locking
screws (V) (fi g. 15).
• Repeat previous operations in reverse order to replace all
elements.
IMPORTANT!! Position both side panels (PL) by taking the locking
pin (A) out of the hole (B) (fi g. 14).
REPLACING THE OVEN LAMP (fi g. 16)
Attention!! Ensure the appliance is switched off before
replacing the lamp to avoid the risk of electric shock.
If the oven lamp needs replacing the new lamp must have the
following characteristics:
15 W - 230 Vac - 50 Hz - E 14 - resistant to high temperatures
(300°C).
To substitute the bulbs follow these instructions:
Extract the side grids as indicated in the previous
paragraph.
Unscrew glass protection cap (V) from bulb holder by lifting
it with a screwdriver (C) against the inside wall of the oven.
Substitute the bulb and reposition all elements back by
following the operation in reverse order.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eudora BO1060 ALCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eudora BO1060 ALCD in the language / languages: English, German as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info