Manual Eudora BDA Elin KIA34 (page 16 of 32) (English, German, French, Italian, Portuguese, Spanish)

582327

Zoom out

Zoom in

1/32

16 457

Clean the inside and outside of the refrigerator before using it.

Then, fill the special ice tray (Fig. 8) with water, set the thermostat according to the

desired temperature, close the door and plug in.

The refrigerator starts automatically. Let it work without any food for half an hour, then

arrange the food in such a way to allow a good circulation of air inside the refrigerator

and close the door.

Leave at least 5 cm between the top of the appliance and any other furniture.

The thermostat keeps automatically constant the temperature inside the refrigerator When

set on position “•“it means that the appliance is not in operation; on positions “1-2-3-4-

5” gradually decreasing temperatures may be obtained.

It is up to the user to set the temperature according to requirements, which depend on the

frequency of opening of the door, the quantity of food placed in the refrigerator, the

room temperature and the location of the refrigerator.

Position ”3" is generally the most suitable, unless the appropriate compartment should

be full of frozen food, the position between “4” and ‘5” is recommended, very near “4”

in room temperature slower than 20° C and very near ‘5" in room temperatures higher

than 20° C In case of prolonged absences, it is advisable to stop the functioning of the

refrigerator and keep the door open to avoid the formation of moulds or unpleasant

smells.

COLD AIR FLOW REGULATION

Depending on the room temperature, it is advisable to adjust the circulation of air inside

the refrigerator by moving the proper plate, should the refrigerator have one, on posi-

tion “A” for temperatures i above 20° C (Fig. 10) and on position ”B”” i for tempera-

tures below 20° C (fig. 10a). 1 Before turning the thermostat knob on position “5”,

please bring the proper plate on pos. “B”.

Effettuare la pulizia, interna ed esterna del frigorifero prima di inserire la spina. Quindi

riempire di acqua l'apposita bacinella (Fig. 8), posizionare il termostato in funzione della

temperatura desiderata, chiudere la porta, inserire la spina e il frigorifero si mette automati-

camente in funzione.

Lasciatelo funzionare a vuoto per 30 minuti circa, disponete poi le vivande in modo da assi-

curare una buona circolazione d’aria all’interno del frigorifero e richiudete la porta.

Lasciare una distanza di almeno 5 cm. fra la parete superiore dell’apparecchio ed eventua-

li pensili.

II termostato mantiene automaticamente costante la temperatura all’interno del frigorifero.

L’indice in posizione di “•” indica che il frigorifero e spento; nelle posizioni “12-3-4^5" si

hanno temperature gradualmente decrescenti.

FUNZIONAMENTO 2 STELLE

FUNCTIONING 2 STARS

Il freddo va regolato tenendo conto del la 4 frequenza delle aperture della porta, della quan-

tità di vivande sulle griglie e della temperatura ambiente (t.a.).

Generalmente la posizione “3” e la più adatta salvo nel caso in cui l’apposito scomparto sia

stivato di cibi congelati; in tal caso la posizione ottimale e tra il “4” (t.a. minore 20° C) e il “5”

(t.a. maggiore 20° C)

In caso di prolungate assenze b consigliabile arrestare il funzionamento del frigorifero e

tenere aperta la porta per evitare la formazione di muffe di cattivi odori.

REGOLAZIONE DEL FLUSSO DI ARIA FREDDA

A seconda delle diverse temperature dell’ambiente, e consigliabile regolare la | circolazione

dell’aria fredda all’interno del frigorifero. Qualora il frigorifero ne sia dotato, spostare il

ripiano appositamente realizzato in posizione ”A” (Fig. 10) per temperatura ambiente supe-

riore a 20° C e in posizione “B” per temperatura inferiore a 20° C F (Fig .1Oa). E’ indispen-

sabile inoltre portare l’apposito ripiano in posizione “B” qualora si voglia spostare la mano-

pola termostato in posizione “5”.

fig. 10 a

fig. 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eudora BDA Elin KIA34 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eudora BDA Elin KIA34 Manual

Product: