651169
46
Zoom out
Zoom in
Previous page
1/48
Next page
46 - Epic 442 Assembly and User Manual
4930659-02
Parameters
Parameters are settings within the timer soft-
ware which allow changes to the way the
tanning bed operates. Your tanning bed must
be disconnected from any external timers to
access these parameters from the timer dis-
play handle.
1. With the bed idle (display showing “0”),
press the STOP button and, without re-
leasing it, press the START/TIME but-
ton. The display will change to “PRAM”
briey, then “P 1” to signify parameter
1, then the parameter value.
2. Use the ‘+’ and/or ‘-’ buttons to change
the parameter value.
3. Press the START/TIME button to advance
to the next parameter.
4. Press STOP to return to idle.
The next page shows the parameters that
can be changed by the salon owner. Refrain
from changing any parameters not listed as
bed function may be adversely affected.
To reset the bed to factory defaults, set the
Bed Address (P 1) to 255, exit parameter
mode and cycle power to the bed.
Updating Timer Software
Hanging on the foot end of the bed (next
to the body fan) is a cable with a USB ash
drive. This ash drive contains a single le
which is the timer software. During normal
use the ash drive may be removed as it
does not interface with the timer. However,
if ETS releases a new software update, you
can easily update the timer.
Be sure to keep the ash drive with the bed.
It contains one le and must not be used
for any other purposes. Updates will be
emailed to you to copy onto this drive from
any computer, but it must be the only le on
the drive to work properly.
Updating the timer software:
1. With the bed idle (display showing “0”),
press and hold the STOP button until the
display changes from “0” to “Id”.
2. Within 5 seconds, press the FAN button
and the display will show “PGM?” indi-
cating it is ready to program the timer.
3. Press the START/TIME button to begin
programming the bed. The display will
show “WAIT”.
4. After the update is complete, the timer
will reset and the bed will be ready to go
once the timer display reads “0”.
In the event you receive an email contain-
ing an update le, the email will contain full
instructions on this procedure as well as the
verication process to make sure the update
was successful.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ETS Tan Epic 442 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ETS Tan Epic 442 in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info