667565

Etna VWV549ZIL Manual

92
Zoom out
Zoom in
Previous page
1/116
Next page
EN 8
OPERATION
Switching on
1. Open the door.
2. Add detergent and rinse agent (consult 'Dishwasher detergents' and 'Rinse aid’). Check the
amount of salt in the salt reservoir (consult ‘Adding Salt’).
3. Press the “on/off” button to switch on the appliance.
The power indicator will light up when the appliance is switched on.
4. Select the desired cycle by pressing the program button (see cycle selection table”).
The cycle indicator corresponding to the selected cycle will light up.
5. Close the door.
The dishwasher will automatically start running the selected cycle.
Stopping or changing a wash cycle
• Open the door.
• Press and hold the program button for more than 3 seconds. You can now re-select the
desired cycle (see “cycle selection table”).
• Close the door.
Note! A cycle that has already begun can only be changed in the start-up phase. After
this, the detergent will be sprayed all over the dishes or the machine may have already
pumped out the water. In that instance, you must refill the detergent compartment (see
section on Detergent compartment).
Following the end of the wash cycle
Once the wash cycle has completed, an audible signal will sound for eight seconds.
• Open the door.
• Switch the appliance off using the on/off button. Wait a few minutes before unloading the
dishwasher. The dishes and cutlery will still be very hot immediately following the end of the
cycle. There is a chance that dishes may break as a result of the heat. Moreover, the dishes
dry better when allowed to stand for a few minutes.
… 92 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna VWV549ZIL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna VWV549ZIL in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info