Manual Etna VWV549WIT (page 92 of 116) (English, German, Dutch, French)

667564

Zoom out

Zoom in

1/116

EN 8

OPERATION

Switching on

1. Open the door.

2. Add detergent and rinse agent (consult 'Dishwasher detergents' and 'Rinse aid’). Check the

amount of salt in the salt reservoir (consult ‘Adding Salt’).

3. Press the “on/off” button to switch on the appliance.

The power indicator will light up when the appliance is switched on.

4. Select the desired cycle by pressing the program button (see cycle selection table”).

The cycle indicator corresponding to the selected cycle will light up.

5. Close the door.

The dishwasher will automatically start running the selected cycle.

Stopping or changing a wash cycle

• Open the door.

• Press and hold the program button for more than 3 seconds. You can now re-select the

desired cycle (see “cycle selection table”).

• Close the door.

Note! A cycle that has already begun can only be changed in the start-up phase. After

this, the detergent will be sprayed all over the dishes or the machine may have already

pumped out the water. In that instance, you must refill the detergent compartment (see

section on Detergent compartment).

Following the end of the wash cycle

Once the wash cycle has completed, an audible signal will sound for eight seconds.

• Open the door.

• Switch the appliance off using the on/off button. Wait a few minutes before unloading the

dishwasher. The dishes and cutlery will still be very hot immediately following the end of the

cycle. There is a chance that dishes may break as a result of the heat. Moreover, the dishes

dry better when allowed to stand for a few minutes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etna VWV549WIT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etna VWV549WIT Manual

Product: