667557
53
Zoom out
Zoom in
Previous page
1/58
Next page
EN 25
INSTALLATION
Warning!
The dishwasher must always be placed in a frost-free room.
Electrical connection
This dishwasher is designed for connection to 220-240 V - 50 Hz, with a
fuse of 16 Amp.
Attention!
Make sure that the voltage and the frequency values for the current
in the home correspond to those on the rating plate.
Make sure the electrical socket is earthed before connecting the
appliance. If the electrical socket to which the appliance must
be connected is not appropriate for the plug, please consult the
manufacturer or its service agent or a similarly qualified person.
Do not use an extension cord or an adapter plug with this
appliance.
Do not, under any circumstances, cut or remove the third grounding
prong from the power cord!
Cold water connection
Connect the cold water supply hose to a threaded (¾ inch)
connector and make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended
period of time, let the water run to make sure that the water is clear
and free of impurities. If this precaution is not taken, there is a risk
that the water inlet can get blocked and damage the appliance.
Hot water connection
The dishwasher is not suitable for hot water connection.
Positioning the appliance
Position the appliance in the desired location. The back should rest
against the wall behind it, and the sides along the adjacent cabinets
or wall. The dishwasher is equipped with water supply and drain
hoses that can be positioned to the right or the left to facilitate proper
installation.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna VWV547 WIT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna VWV547 WIT in the language / languages: English, Dutch as an attachment in your email.

The manual is 6,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info