517367
96
Zoom out
Zoom in
Previous page
1/114
Next page
EN 12
Set the time
When the appliance is connected to the network for the first time,
you need to set the time. The display reads '0:00'. The clock runs
as long as the combi-microwave is connected to the network.
1. Press twice on the timer button.
The hours flash in the display.
2. Turn the control dial to set the hours.
The set hours appear in the display.
3. Press the timer button again.
The minutes flash in the display.
4. Turn the control dial to set the minutes.
The set minutes appear in the display.
5. Press the timer button again.
The clock is set: the current time appears in the display with a
flashing ':'.
Kitchen timer
The kitchen timer gives a signal after reaching the set time.
1. Press once on the kitchen timer button.
The display reads '0:00'.
2. Turn the control dial to set the time.
The display indicates the set time.
3. Press the start button.
The set time counts down in the display.
When the set time has been reached, the current time
appears again in the display, and you will hear 5 beeps.
You cannot adjust the set time during countdown. Press on
the stop button to interrupt the kitchen timer and set a new
time.
Microwave function
With this function you can set the power and time yourself. If you
don't set the power, the microwave will switch on at the highest
power. In the following table you can see which power levels can
be set.
cONtrOlS
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna T2125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna T2125 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info