Manual Etna T017H (page 11 of 22) (English, German, Dutch, French)

2782

Zoom out

Zoom in

1/22

INSTALLATION

Building-in

1. Make a hole in the side of the kitchen

cabinet to enable the gas pipe to be passed

through.

2. Stick the sealing strip around the

opening (C) .

3. Place the appliance in the cut-out.

4. Secure the hob by tightening screw (B) to

secure clamp (A) (see below).

INSTALLATION

Building in dimensions

Saw the opening in the worktop. This should be

done very accurately (see ill.). Also saw out

any partitions that may be present. Ensure that

there is sufficient space allowed at the sides

and at the back. Ensure that there is a clear

space with a height of at least 15 mm below the

hob.

Please note:

The distance between the hob and the rear

wall must be at least 40 mm.

clearance required

500

585

560

480

min.40

480

685

510

560

min.40

T007H/V/F - T012VW T017H - T017VW

Min. 30

Max. 40

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etna T017H in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna T017H

Etna T017H User Manual - English, German, Dutch, French - 59 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etna T017H Manual

Product: