692427
60
Zoom out
Zoom in
Previous page
1/64
Next page
EN 30
The oven is not operating, the symbol lights up and the door will not open.
The door lock is activated. Deactivate the door lock.
The oven is operating, the symbol
lights up and the door will not open.
The door lock is activated. Turn the control dial to position . Deactivate the door lock. To
continue cooking, select the desired cooking function again.
I have turned the control dial to position and selected a pyrolysis programme (P1, P2
or P3) but the symbol flashes quickly and a buzzer sounds.
The oven door is not closed properly, so the door cannot be locked and the pyrolytic
process has been blocked. Check the door and make sure it is properly closed. Then set
the control dial to the position and repeat the sequence to activate the pyrolysis.
I have turned the control dial to position and selected a pyrolysis programme (P1, P2
or P3) but the symbol does not light up and the oven does not heat up.
The door switch is not working even though the door is properly closed. Call the Technical
Assistance Service Department as there is a fault in the door switch.
The pyrolysis programme has ended and the oven is cold, but the door is locked and
symbol and 0:00 are flashing.
You did not turn the control dial to position when the pyrolysis programme ended. Set
the control dial to position .
The control dial is in position and the door is still locked.
The oven has not cooled down to the safe temperature limit. Wait until the oven cools and
the symbol goes off.
Repairs should only be performed by a qualified service technician. If maintenance is
required, take the plug out of the socket and contact the Etna customer service.
Have the following information at hand when you call:
The model number and serial number. This information is on the oven identification plate
which is on one side of the opened door.
Warranty details.
A clear description of the problem.
Choose a clean, dry place if you have to store the oven temporarily, as dust and
moisture can damage the appliance.
TROUBLESHOOTING
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna OM971RVS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna OM971RVS in the language / languages: English, Dutch as an attachment in your email.

The manual is 18,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna OM971RVS

Etna OM971RVS User Manual - German, French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info