571330
22
Zoom out
Zoom in
Previous page
1/29
Next page
22
© ETNA Coffee Technologies b.v.
Instruction for use Nova Instant
COFFEE TECHNOLOGIES
4.6 Weekly maintenance
Carry out the following operations on a weekly basis:
Clean the mixer components
4.6.1 Cleaning mixer components
Clean the following components during weekly maintenance:
Extractors
Mixing bowls
Hoses
Extraction lid
ƽ
Wash your hands before continuing with this procedure.
1. Open the door.
2. Remove the closed ingredient containers from the machine. Keep
them in a clean and dry place.
3. Detach the hoses from the mixing chambers.
4. Detach the hoses from the dispensing pipes.
5. Remove the dispensing pipes from the dispensing holder.
6. Release the mixing chamber by pulling the green catch below it
forwards.
7. Take the mixing chamber out of the machine by carefully pulling the
bottom of the chamber towards you.
8. Remove the extraction lid from the machine.
9. Remove the mixer blade from the axle of the mixer motor. Use the
mixing chamber as a hoist to do so.
10.Clean all parts in hot water and dry them carefully.
11.Clean the immediate vicinity of the mixer in the machine with a
damp cloth.
12.Put the mixer blade back. Ensure that the marking point on the
mixer blade is lined up with the flat section on the engine axle.
13.Put the other cleaned parts back and connect the hoses.
Figure 4-3
Figure 4-4
!
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna Nova Instant at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna Nova Instant in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna Nova Instant

Etna Nova Instant User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info