571326
10
Zoom out
Zoom in
Previous page
1/18
Next page
10
© ETNA Coffee Technologies b.v.
Instruction for use MUNDO
COFFEE TECHNOLOGIES
5 PREPARING THE MACHINE FOR USE
Before the MUNDO is ready for use, some activities have to be
performed. These activities must be carried out by qualified personnel.
However, they are still included in this manual and the various stages in
the installation procedure are explained below.
The machine must first be set up in a suitable location (see paragraph
5.1) and the packaging removed (see paragraph 5.2). The machine
should then be connected to the mains and water supply (see
paragraph 5.3). The containers should then be filled (see paragraph
5.4). Once the boiler has been drained and refilled, the machine is
ready for use(see paragraph 5.5).
5.1 Installing machine
The location of the machine must meet a number of conditions.
The surface on which the machine stands must be flat and stable.
Also make sure that there is adequate clearance at the side to allow
the door to open. And free space at the rear for the mains cable
connection.
Site the machine in an area that does not freeze and is not too
humid.
Finally, it is advisable for hygiene reasons not to site the machine in
the vicinity of toilets.
If the machine is standing or has been standing in an area
where the ambient temperature is lower than 0 °C, there is
a risk of the water in the machine freezing.
The machine should be placed in an area where the
ambient temperature satisfies the requirements described
in chapter 10 for at least 8 hours before being switched
on.
5.2 Removing packaging material
The following parts are packaged and stored in the drip tray of the
machine: the mains cable and the service key. Two door keys for
opening the machine are attached to the cup holder.
1. Remove the external packaging material.
2. Take the keys out of the cup holder.
3. Take the other parts out of the packaging.
4. Use the adjustable feet to stand the machine level.
In the event of damage or missing parts, contact the
supplier immediately.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna MUNDO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna MUNDO in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna MUNDO

Etna MUNDO User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info