657315
19
Zoom out
Zoom in
Previous page
1/32
Next page
19 SAFETY REGULATIONS
WARNING! If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualifi ed persons in order
to avoid a hazard.
Installation
WARNING! Only a qualifi ed person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
Always be careful when you move the appliance because it is heavy.
Always wear safety gloves.
• Make sure the air can circulate around the appliance.
Wait at least 4 hours before connecting the appliance to the power
supply. This is to allow the oil to fl ow back in the compressor.
• Do not install the appliance close to radiators or cookers, oven or hobs.
• The rear of the appliance must stand against the wall.
• Do not install the appliance where there is direct sunlight.
Do not install this appliance in areas that are too humid or too colds,
such as the construction appendices, garages or wine cellars.
When you move the appliance, lift it by the front edge to avoid
scratching the fl oor.
Electrical connection
WARNING! Risk of fi re and electrical shock.
• The appliance must be earthed.
• All electrical connections should be made by a qualifi ed electrician.
Make sure that the electrical information on the rating plate agrees
with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
Make sure not to cause damage to the electrical components (e.g.
mains plug, mains cable, compressor). Contact the Service or an
electrician to change the electrical components.
• The mains cable must stay below the level of the mains plug.
Connect the mains plug to the mains socket only at the end of the
installation. Make sure that there is access to the mains plug after the
installation.
Do not pull the mains cable to disconnect the appliance. Always pull
the mains plug.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna KKV849 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna KKV849 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info