Manual Etna KKD50122 (page 68 of 84) (English, German, Dutch, French)

667525

Zoom out

Zoom in

1/84

EN 8

• The rear of the appliance must stand against the wall.

• Do not install the appliance where there is direct sunlight.

• Do not install this appliance in areas that are too humid or

too colds, such as the construction appendices, garages or

wine cellars.

• When you move the appliance, lift it by the front edge to

avoid scratching the floor.

Electrical connection

• WARNING! Risk of fire and electrical shock.

• The appliance must be earthed.

• All electrical connections should be made by a qualified

electrician.

• Make sure that the electrical information on the rating plate

agrees with the power supply. If not, contact an electrician.

• Always use a correctly installed shockproof socket.

• Do not use multi-plug adapters and extension cables.

• Make sure not to cause damage to the electrical

components (e.g. mains plug, mains cable, compressor).

Contact the Service or an electrician to change the electrical

components.

• The mains cable must stay below the level of the mains

plug.

• Connect the mains plug to the mains socket only at the end

of the installation. Make sure that there is access to the

mains plug after the installation.

• Do not pull the mains cable to disconnect the appliance.

Always pull the mains plug.

SAFETY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etna KKD50122 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etna KKD50122 Manual

Product: