772722

Etna KKD4088 Manual

92
Zoom out
Zoom in
Previous page
1/96
Next page
EN 22
Faults table
When you have any doubts about whether your appliance is working properly you should not
immediately assume that it is defective. We recommend that you should in any case check the
points in the following table.
Symptom Possible cause Solution
The appliance emits a slight
odour when used for the first
time.
New appliance. This is normal and disappears
when the appliance starts
cooling.
The appliance does nothing;
the lighting does not come on.
Plug not in socket. Insert the plug in the socket.
Thermostat off. Adjust the thermostat to the
correct setting.
Temperature inside the
appliance too high or too low.
Thermostat setting incorrect. Adjust the thermostat
properly.
The door seals are dirty or the
seals are damaged.
Clean the door seals. Call the
service centre if the door seals
are damaged.
Water runs from the
refrigerator.
Defrost water drain clogged. Clean defrost water drain (see
"Defrost").
Appliance makes a noise. Incorrect positioning of food in
the appliance.
Place foods in the proper
manner in the appliance.
There is an object against the
appliance.
Remove the object.
The LED lighting does not
work.
LED-lamp faulty. Call an authorized service
technician. Do not attempt to
replace the LED lighting by
yourself.
Ice building up. Door freezer compartment not
closed properly.
Make sure that the door is
closed properly.
Freezer compartment is not
periodically defrosted.
Defrost the freezer
compartment to remove the
ice.
The door seals are dirty or the
seals are damaged.
Clean the door seals. Call the
service centre if the door seals
are damaged.
Note
It is normal for the cooling circuit to make gurgling or expansion noises.
If you are unable to solve the problem then contact the service centre. When you do so, state the
type, model and serial number shown on the type plate or label on the inside of the appliance.
FAULTS
… 92 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna KKD4088 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna KKD4088 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info