772612
38
Zoom out
Zoom in
Previous page
1/92
Next page
EN 16
Using the cooking timer
1. Select a cooking zone that is switched On with a power setting.
2. Press the – and + keys simultaneously.
The time setting ‘0 0’ of the activated cooking zone is displayed in the top two displays.
At the cooking zone itself, a flashing point indicates that the timer can be set for that
cooking zone.
3. Press the - or + key to set the desired time.
When you first press the - key, the time will immediately be set to 30 minutes.
If you keep the - or + key pressed, the time will run higher or lower at an increasingly
faster rate.
The time setting is visible for a few seconds; then all set power levels are displayed, and
at the cooking zone for which a timer has been set, a point is displayed.
After the set time has elapsed, ‘0 0’ will flash in the display, as well as the timer’s point.
The cooking zone switches Off. Furthermore, you will hear a repeated short beep. Press
any key to switch Off the audible signal. If you don’t do this, the signal will switch Off
automatically after 2 minutes.
Note!
If no cooking zone has been activated and you press the - and + keys simultaneously,
the time setting of the timer is displayed (no points will flash at a cooking zone)!
By again pressing the - and + keys simultaneously (multiple times), the time setting
of a cooking zone that is switched On is displayed (the point flashes at the relevant
cooking zone).
Tip
Check the remaining time by pressing the - and + keys simultaneously (multiple times).
The time that appears in the display is either from the cooking zone that is switched
On (with flashing point) or from the minute minder (no point flashes). Adjust the cooking
time as needed using the – or + key.
OPERATION
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna KIV360WIT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna KIV360WIT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna KIV360WIT

Etna KIV360WIT Installation Guide - English, German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info