692134
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
Introduction
With this conversion-set you can convert your gas hob from
natural gas (G25.3 / 25 mbar) to propane/butane gas (G30 / 28-30
mbar). Before you start conversion, check whether your gas hob is genu-
inely set to natural gas.
Tools
A. Leak spray and/or special
pressure gauge
B. Tube- (or open end spanner 7)
C. Screwdriver 2 mm (blade width)
Attention: Check the gas tightness
after converting the appliance
(see chapter 2).
Replace the following parts:
- injector for the burners
- 2 data labels with the modified gas setting
Dismantling
Prevent damage of the work top. Lay down parts of the appliance on a
protected base.
1. Remove the pan supports, burner heads and the ornamental cover
(if present). See fig. B.
2. Remove all injectors in the burners. See illustrations C and D.
Use a tubular spanner or open end spanner 7 for disassembling/
assembling the injector. Images C1 / C5 show the different types
of burners and injectors that can occur.
3. Pull up the control knobs vertically and remove them.
(see illustration E).
4. Use a metal plate or plier (see illustration C5) to remove the wok
injector on illustration C4.
Unlike the G25.3 version, the wok injector for G30-30 mbar has
the known smaller size (see illustration C2).
Converting
1. Replace the injectors (G30 - 28/30 mbar) in the burners (see
illustration F). Use a open end spanner 7 for disassembling/assembling
the injector.
For verification, the values of the nozzles can be found in the table of
values for injectors (see p. 9).
2. Place the burner heads and connect the hob to a gas cylinder of
G30-30 mbar.
3. Using a small screwdriver, adjust the simmer setting with the simmer
setting screw. The gas taps simmer setting screw (fig. G) is located on the
gas tap casing.The simmer setting screw on the gas tap casing is accessible
via the recess in the drip tray (fig. G+H). The drip tray does not need to be
removed. Ignite the burner, turn the gas tap to ‘simmer setting’ and adjust
the flames to a length of approx. 4mm (see fig. I). Please note: the flame
may not blow out in simmer setting. After adjusting, the flame should
be stable. I.e., the burner may not blow out, for example, when fanned
manually.
4. Partially attach 2 data stickers on the current data sticker (with gas
type / gas tightness) to the bottom of the gas hob (see fig. J+K).
5. Place the 3rd appliance identification card on the front of the gas
hob manual (see figure L).
Warning!
Check the appliance for gas tightness, especially the injectors and
simmer setting screws!
Always check for gas tightness before using the appliance!
B
C
A
G
H
I
J
Deze kookplaat staat ingesteld
voor G30 / 28-30mbar (LPG).
L
K
F
B
C1
C3
C4
C2
D
C5
E
A
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna KGG860ZTA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna KGG860ZTA in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna KGG860ZTA

Etna KGG860ZTA Installation Guide - English - 2 pages

Etna KGG860ZTA User Manual - English - 36 pages

Etna KGG860ZTA Installation Guide - German - 2 pages

Etna KGG860ZTA User Manual - German - 36 pages

Etna KGG860ZTA Installation Guide - Dutch - 2 pages

Etna KGG860ZTA User Manual - Dutch - 36 pages

Etna KGG860ZTA Installation Guide - French - 2 pages

Etna KGG860ZTA User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info