692135
15
Zoom out
Zoom in
Previous page
1/36
Next page
EN 7
MALFUNCTIONS
SYMPTOM POSSIBLE CAUSE SOLUTION
Burner
extinguishes out
after igniting.
You did not press the
control knob long and/or
deep enough (at least 3
seconds).
Thermocouple (3) is dirty.
Keep the control knob fully pressed for
at least 3 seconds between high and low
settings. This can be longer the first time,
because of the supply of gas.
Clean/dry the thermocouple.
Glass plate broken. Object fallen onto it. Close the gas main switch and pull the plug
out of the socket. Contact the your installer.
Where the GAD type examination certificates of KIWA refer to the appliance category
“I2EK” this is understood as:
This appliance was configured for the appliance category K (I2K) and is suitable for the use of
G and G+ distribution gases according to the specifications as included in the NTA 8837:2012
Annex D with a Wobbe index of 43.46 – 45.3 MJ/m3 (dry, 0 °C, upper value) or 41.23 – 42.98
(dry, 15 °C, upper value).
This appliance can moreover be converted and/or again be calibrated for the appliance
category E (I2E) This therefore implies that the appliance: “is suitable for G+ gas and H gas or
is demonstrably suitable for G+ gas and can demonstrably be made suitable for H gas” within
the meaning of the “Dutch Decree of 10 May 2016 regarding amendment of the Dutch Gas
Appliances Decree….”
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna KGG673ZTA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna KGG673ZTA in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna KGG673ZTA

Etna KGG673ZTA Additional guide - English - 16 pages

Etna KGG673ZTA Installation Guide - English - 2 pages

Etna KGG673ZTA Additional guide - German - 16 pages

Etna KGG673ZTA Installation Guide - German - 2 pages

Etna KGG673ZTA Additional guide - Dutch - 16 pages

Etna KGG673ZTA Installation Guide - Dutch - 2 pages

Etna KGG673ZTA Additional guide - French - 16 pages

Etna KGG673ZTA Installation Guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info