667412
44
Zoom out
Zoom in
Previous page
1/60
Next page
EN 16
6. Select a temperature with the temperature knob and an oven function with the function
knob.
The oven automatically switches on when the calculated start time has been reached
The thermostat light for the oven lights up and the cooking symbol appears in the display.
The oven sounds a signal when the end time has been reached.
The ‘A’ starts flashing and the oven switches off automatically.
7. After the cooking time has elapsed, first turn the temperature knob and the function knob to
‘0’. Then press any key to switch off the alarm signal.
You can see and/or adjust the remaining time of the baking process or the end time in the
display at any moment: press the ‘mode’ key until ‘dur’ or ‘End’ appears in the display; the
‘A’ in the display flashes. Use the + and the - keys to adjust the duration or the end time
(while the ‘A’ is flashing).
If you want to switch off the oven during baking, set the remaining duration of the baking
process to ‘0·00’ and set the temperature knob and the function knob to ‘0’.
Kitchen timer
The audible signal of the kitchen timer will only sound after the expiry of the set time. The kitchen
timer will not switch off the oven.
1. Press the ‘mode’ key.
A small clock appears in the display and the dot in the middle of the time display flashes.
2. Use the + and - keys to set the correct time (while the dot is flashing).
Now wait 5 seconds; the set time is confirmed automatically.
The time of day appears in the display again and the clock stops flashing.
The time now begins to count down automatically.
When the time has elapsed, a beep sounds and the clock symbol flashes.
3. Press any key to switch off the alarm signal.
You can see and/or adjust the remaining time of the kitchen timer in the display at any
moment: press the ‘mode’ key, the remaining time of the timer appears in the display
and the clock symbol flashes. Use the + and the - keys to adjust the time (while the clock
symbol is flashing).
Setting the audible signal
You can select one of three different audible signals. Ensure that the current time is shown in the
display.
1. Hold the - key until you hear an audible signal.
You will then hear a different audible signal when you press the - key again.
Wait for 5 seconds after you hear the desired signal; the set signal is confirmed automatically.
OPERATION
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna FIV760WIT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna FIV760WIT in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna FIV760WIT

Etna FIV760WIT User Manual - German - 60 pages

Etna FIV760WIT Additional guide - Dutch - 2 pages

Etna FIV760WIT User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info