772683
48
Zoom out
Zoom in
Previous page
1/60
Next page
EN 20
MAINTENANCE
1. Open the oven door fully and turn the pawls back as far
as they will go.
2. Close the door slowly so that the clips are in the flanges (in which
the pawls fit).
3. At approximately 15° (relative to the closed door position) lift the
door slightly upwards and lift it out of both hinge holders.
Use the reverse order to assemble the door.
1. Insert the door at an angle of 15° in the hinges on the front of the
appliance and push the door forwards and downwards so that the
hinges slide into their notches.
Check to be sure the hinge notches are properly in place.
2. Then open the door fully and turn the pawls back to their initial
position.
3. Close the door slowly and check that it closes properly.
If the door does not open or close properly, make sure the hinge
notches are positioned correctly in the hinge holders.
Replacing the oven lamp
Before replacing the oven lamp, switch off the appliance by
removing the plug from the socket or switching off the fuse in the
fuse box. Allow the appliance to cool down. Wear hand protection
when removing the lamp.
The appliance contains a light source of energy efficiency class G.
1. Unscrew the glass cover (anticlockwise) and replace the oven lamp.
2. Fit a new lamp with the same specifications (230 V, 40 Watt, type
G9, resistant to 250 °C).
3. Screw the glass cover back on tightly.
The lamp in this household appliance is only suitable for illumination of
this appliance. The lamp is not suitable for household room illumination.
The lamp is consumable material and is not covered by the guarantee..
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna FG890 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna FG890 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info