772680
49
Zoom out
Zoom in
Previous page
1/60
Next page
EN 21
Fault table
If you are uncertain about whether your appliance is functioning properly,
this does not automatically mean there is a defect. Try to deal with the
problem yourself first by checking the points mentioned below in the
table or visit our website ‘www.etna.nl’ for more information.
Problems with the hob Possible cause Solution
There is a smell of gas in the
vicinity of the appliance.
The appliance connection is
leaking.
Turn off the main gas tap.
Contact your installer.
A burner does not ignite. Plug not in socket. Insert the plug into the wall
socket.
Fuse defective/fuse in meter
cabinet switched off.
Replace the fuse or switch on
the fuse in the fuse box.
Spark plug dirty/damp. Clean/dry the spark plug.
Burner parts not correctly
installed.
Assemble the burner parts
using the centring ridges.
Burner parts dirty/damp. Clean/dry the burner
components. Make sure that
the outflow holes are open.
Main gas supply valve closed. Open the main gas valve.
Fault in gas mains. Consult you gas supplier.
Gas bottle or tank is empty. Connect a new gas bottle or
have the tank refilled.
Wrong type of gas used. Check whether the gas used
is suitable for the appliance.
Contact your installer if it is
not correct.
Control knob not pressed in
far enough.
Keep the control knob pressed
in far enough between full and
low. This can take longer the
first time because of the gas
supply.
FAULTS
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna FG860ZT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna FG860ZT in the language / languages: English, Dutch as an attachment in your email.

The manual is 1.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info