557783
13
Zoom out
Zoom in
Previous page
1/32
Next page
452511
- Adding washing and softening agents
(see Tips for washing and energy saving)
• pre-wash compartment
main wash compartment
• softener compartment
If you do not apply the program which includes the pre-wash
feature, you may add washing detergent directly into the drum,
using the measuring vessel.
When adding softener, be careful to ll the dispenser only
up to the marked level.
Be sure to close the detergent dispenser when opening/
closing the appliance door.
Push the START button (E). The machine starts operating after
a few seconds. LED indicating the current washing stage lights
up. If the door is not closed after the machine is switched on, the
START LED starts ashing again after a few seconds.
When you close the door, the machine initiates the selected
program. Time remaining until the end of the washing program is
indicated on the display (for LED).
As each washing stage is completed the relevant washing stage
indicator LED goes off and the subsequent one goes on.
In case you would like to alter the washing program after the
initiated washing operation, turn the program selector for one
second to the position “0”, followed by the selection of a new
program. Switching the machine off deletes any previously
selected additional functions(i.e. Pump stop), so they have to be
reactivated.
Upon switching OFF, all additional pre-selected functions
are deleted; therefore they must be switched-ON again.
- End of washing program
The end of washing program is signalized by ashing washing
progress LEDs. The message “End” is indicated on the display.
Washing machine door can be opened.
Take the laundry out of the drum and remove any remaining
particles or foreign bodies from the door seal.
Leave the door ajar to let the machine dry.
Close the water inlet tap.
Turn off the washing machine by rotating the program selector
knob (A) to position “0”.
Start the operation
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EWM247D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EWM247D in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna EWM247D

Etna EWM247D User Manual - German - 32 pages

Etna EWM247D User Manual - Dutch - 32 pages

Etna EWM247D User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info