557785
11
Zoom out
Zoom in
Previous page
1/32
Next page
452511
The display will turn on again when you rotate the program selector
dial or press any button.
If no action is taken after the end of the program, the display will also
turn off after ve minutes.
Washing stage signal lamps and the START/PAUSE key ash
intermittently.
Low water temperature, low network voltage, and
smaller loads of laundry may extend the washing time;
the time indicated on the display is constantly adjusted
to account for such conditions.
LOW POWER MODE
P o = weighted power in ‘off mode’ [W] 0,10
P l = weighted power in the ‘left on mode’ [W] 0,65
T l = time in ‘left on mode’ [min] 10,0
Delayed start (F)
Press the (F) button; the time “00:00” will be indicated on the
display (G). Each time the button is pressed again, the time on
the display will be increased by one hour (maximum delay is 23
hours). After the time has been selected, the LED over the button
lights up (and remains lit). If no other button is pressed in the
following 5 seconds, program duration is indicated on the display.
The function is activated when the START (E) button is pressed.
Time is decreased by minutes. When the count-down is over, the
washing program starts automatically.
To interrupt or change the delayed start setting, press the
START / PAUSE button (E).
To change the delay time, select a new time by pressing the
(F) button. Press START to resume the count-down. To quickly
interrupt the delayed start, press the (F) button and hold it for
three seconds. Press the START button to resume the program.
Spinning speed (rpm) / Pump stop
By pressing the (B) button, you can decrease the spinning speed
(in rounds per minute) to “0”. After pressing the button for the
rst time, the optimum rpm setting for the selected program is
indicated. By each subsequent press on the button, the spinning
speed is decreased. The last selection is “pump stop”, which
means that laundry remains soaked in the last rinsing water. Use
this function to prevent creasing when you are not able to take
the laundry out of the washing machine immediately after the
washing cycle is over. This function is particularly appropriate for
synthetics
and delicate laundry . Use of this function is not
recommended with wool
.
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EWM246D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EWM246D in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna EWM246D

Etna EWM246D User Manual - German - 32 pages

Etna EWM246D User Manual - Dutch - 32 pages

Etna EWM246D User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info