77779
21
Zoom out
Zoom in
Previous page
1/22
Next page
18
MAINTENANCE
Changing the direction in which
the door opens
1. Adjust the two levelling feet to their highest
position. Tilt the refrigerator backwards
and rest it on something solid.
Attention: Do not lay the refrigerator
completely flat as this may damage the
coolant system.
2. Undo the 3 screws and remove the lower
hinge.
3. Slide the door down about 15 cm until it
comes loose from the upper hinge and
remove the door.
4. Remove the blanking plates covering the
handle screws. Remove the screws and
then remove the handle.
5. Remove the blanking plates from the
opposite side of the door.
6. Fit the handle to the other side of the door
with the 2 screws. Replace all the blanking
plates.
7. Using a flat bladed screw driver remove
the pin from the top hinge. Replace it in the
hinge on the opposite side.
8. Remove the screw from the side of the
refigerator where the hinge is to be re-
fitted and replace it on the other side.
9. Slide the door back on to the top hinge,
making sure that the upper hinge pin fits
into the upper hole of the door.
10.Fit the lower hinge to the other side of the
refrigerator.
11.Check that door is aligned horizontally and
vertically and that the seals are closed on
all sides before finally tightening the
bottom hinge. Level the appliance with the
adjustable feet.
88026125 HL EKT1441_EKV1751.qxp 14-03-2008 17:10 Pagina 18
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EKT 1441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EKT 1441 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info