444446
28
Zoom out
Zoom in
Previous page
1/39
Next page
USE
27
Lighting the burners
Press the knob of burner in and turn it to the
left and ignite the burner with a match.
The gas flame can be smoothly adjusted from
high to low.
Electrical spark ignition (EFG667/687/688V)
Press the knob of burner in and turn it to the
left, to the full-on position (see fig. 2). Sparks
appear around the burner which then ignites.
The gas flame can be smoothly adjusted from
high to low. If the burner fails to light after
repeated attempts, check to ensure that the
burner cap is properly positioned.
Wok burner ignition (EFG688V)
The wok burner in this appliance is equipped
with an additional safety feature. This feature
allows the ignition of the wok burner only in the
max. position, preventing inadvertent ignition in
minimum position.
The burner is ignited as described below:
Push the knob down when the knob is
in “off” position. Turn the knob counter-
clockwise and keep pushing the knob. You
will feel that the knob goes further down just
at max. position. Sparks appear around the
burner which then ignites. The gas flame
can be smoothly adjusted from high to low.
In case the flames are accidentally put out, turn
the knob tooff position, wait for 60 seconds and
re-ignite the burner again as described.
Flame failure device
The flame failure device ensures that the gas
supply is closed if the flame goes out during
the cooking process.
Hold the control knob pressed in in the full
position for approximately 5 seconds.
The flame failure device will switch on.
Saucepans
The recommended pan sizes are:
For the wok burner, min. 28-34 cm;
For the rapid burner, min.22-26 cm;
For the semi-rapid burner, min.16-20 cm;
For the simmer burner, min. 12-14 cm.
Wrong :
A great deal of heat is
lost along the sides of
the saucepan.
Right:
The heat is evenly
distributed over the
base of the saucepan.
Tip
Keep the lid on the cooking pan while cooking
and save energy. Clean saucepans absorb
heat more efficiently.
fig. 3
fig. 4
fig. 2
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EFG688 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EFG688 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna EFG688

Etna EFG688 Additional guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info