518940
54
Zoom out
Zoom in
Previous page
1/62
Next page
EN 24
General
If you have any doubts about whether your tumble dryer is working
properly, this does not automatically mean that there is a problem. If
in doubt, check the points set out in the following tables or for more
information visit the web site 'www.etnaservice.nl'.
Repairs must be performed by the service centre or a qualified
person. First check whether you are able to rectify the problem
yourself before calling Customer Service.
If you are not able to rectify the fault yourself: remove the plug from
the socket and call Customer Service.
Noise can be caused by:
Vibration: soaking wet clothing is heavy and makes the drum
unbalanced, knocking against its outer walls.
Air outlet: while it is drying the tumble dryer generates steam, which
is vented through the vent pipe, which in turn produces noise.
The sound of the timer when a drying program is running.
EDM207L fault tables
In terms of the error codes you will hear a beep every 15 minutes.
Error code Cause Solution
'E30' is flashing. Heating problem. Check the heating element
and the thermostat.
'E32' is flashing. Humidity sensor fault. Check the humidity sensor
and the printed circuit board.
'E33' is flashing. Temperature sensor fault. Check the temperature
sensor at the front.
'E34' is flashing. Temperature sensor fault. Check the temperature
sensor at the rear.
'E60' is flashing. Motor failure. Check the motor and the
printed circuit board.
FAULTS
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EDM207L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EDM207L in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info