692433
39
Zoom out
Zoom in
Previous page
1/60
Next page
EN 11
OPERATION
Programming the cooking end time
1. Select a cooking function and temperature.
2. Touch (several times) until the symbol on the display starts to flash.
You will see the current time on the timer display.
3. Set the cooking end time by touching or .
An audio signal will sound and the coooking end time will be displayed on the display.
The symbol will flash slowly.
When the set cooking end time is reached, the oven will turn off, an audio signal will
sound and the symbol will flash quickly. 'End' appears in the display.
4. Touch the stop key to stop the audio signal and turn off 'End' and the symbol.
The oven will switch on again.
5. Set the controls to the position to turn off the oven.
You can change the cooking end time at any time by touching (several times) until
the symbol starts to flash quickly. Now touch or to change the time.
Programming the cooking time and the cooking end time
1. Select a cooking function and temperature.
2. Touch (several times) until the symbol on the display starts flashing.
The indication ‘00:00’ will appear on the display.
3. Set the cooking time by touching or .
An audio signal will sound, the remaining cooking time will appear on the display and
the symbol will flash slowly.
4. Touch (several times) until the symbol on the display starts to flash.
You will see the expected cooking end time on the timer display.
5. Set the cooking end time by touching or .
An audio signal will sound and the current time will be shown on the display.
The oven will not be in operation, the and symbols lit up. The oven is now
programmed.
When it is time to start cooking, the oven will turn on and will operate for the
programmed cooking time. While cooking, the remaining cooking time will be displayed
and the symbol will flash slowly.
Once the cooking time has ended, the oven will turn off, an audio signal will sound and
the symbol will flash quickly. 'End' appears in the display.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna CM941 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna CM941 in the language / languages: English, Dutch as an attachment in your email.

The manual is 15,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etna CM941

Etna CM941 User Manual - German, French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info