601792
95
Zoom out
Zoom in
Previous page
1/106
Next page
EN 17
OPERATION
After preheating, you will hear an alarm and the preheating symbol
will blink.
Put the dish on the glass baking tray, and insert it in the oven on
level 1. Press start.
The programmes with ** only use the microwave function.
1. Press the on/off button to activate the microwave function.
‘01:00’ is blinking in the display and the microwave icon appears in
the display.
2. Turn the function knob three positions (P01) or four positions (d01)
to the right.
Time, weight, the first number of the automatic programs and the
defrost icon/automatic cooking program icon are shown in the
display.
3. Turn the selection knob to the right to choose an automatic
cooking program (see the table on page 16). If the symbols stops
blinking, the chosen program has been activated. You can go back
one step by turning the function knob one position to the left.
4. Press the power/weight button to set the weight.
The weight is blinking in the display.
5. With the selection knob you set the right weight. Press the power/
weight button again to confirm the setting.
The weight that can be set depends on the program that you have
chosen.
6. Press the start/pause button to start the automatic cooking
program.
The programmes with a * are preheated (see page 16). During
preheating, the cooking time pauses and the preheating symbol
is on. After preheating, you will hear an alarm and the preheating
symbol will blink. Put the dish on the glass baking tray, and insert it
in the oven on level 1. Press start.
When the cooking program is ready, you will hear 5 beeps. The fan
continues to operate for some time and then stops automatically.
If you do not press the start/pause button, the combi microwave oven
switches itself off automatically after 15 minutes.
95


Need help? Post your question in this forum.

Forumrules
1

Forum

etna-cm144rvs

Reset search

  • My fairly new oven will cease all operatiosn after roughly 15 mins. of warming. Especially when opening after pre-warming it will simply discontinue and stop.

    Any tips what may be the cause and how best to address this? Submitted on 6-7-2020 at 15:06

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna CM144RVS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna CM144RVS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info